1. Mohamad-Ibrahim, M. N. and
Numbere, D. T.: 1999, "Boundary Element Analysis of
the Productivity of Complex Petroleum Well Configurations",
In Boundary Element Technology XIII, Editors: C. S. Chen,
C. A. Brebbia and D. Pepper, WIT Press, Southampton, pp.
25-34
2. Mohamad-Ibrahim, M. N. and Numbere, D. T.: 2001, "Boundary
Shape Effects on the Productivity of Oil Well Clusters",
In Boundary Element Technology XIV, Editors: A. Kassab and
C. A. Brebbia, WIT Press, Southampton, pp. 293-299.
3. M. N. Mohamad Ibrahim, J. Abdullah and K. W. Kong: 2002,
“Boundary Shape Effects at a Constant Perimeter on
the Productivity of Oil Well Clusters”, In Boundary
Element Techniques, Editors: Zhenhan Yao and Aliabadi M.
H., Tsinghua University Press and Springer-Verlag, Beijing,
pp. 61-64.
4. M. N. Mohamad Ibrahim, J. Abdullah and A. S. Mahmud:
2003, “Number of Boundary Element Effects on the Productivity
Performance of an Oil Reservoir” In Boundary Element
Technology XV, Editors: C. A. Brebbia and R. E. Dippery,
WIT Press, Southampton, pp. 259-265.
5. M. N. Mohamad Ibrahim, J. Abdullah and A. K. Basemin:
2003, “Optimizing Oil Production Rate using Pressure
Distribution Studies” In Advances in Boundary Element
Technology IV, Editors: M. H. Aliabadi and R. Gallego, Queen
Mary, University of London, pp. 385-390.
6. M. N. Mohamad Ibrahim and L. F. Koederitz: 2003, “An
Updated Empirical Wettability Classification”, ASEAN
Journal on Science and Technology for Development, Vol.
20(2), pp. 125-134.
7. Mohamad Ibrahim, M. N. and Koederitz, L. F.: 2000, "Two-Phase
Relative Permeability Prediction using a Linear Regression
Model", SPE (Society of Petroleum Engineers) 65631,
Proceedings of the Eastern Regional Meeting, Morgantown,
West Virginia, U.S.A.
8. Mohamad Ibrahim, M. N. and Koederitz, L. F.: 2001, "Two-Phase
Steady-State and Unsteady-State Relative Permeability Prediction
Models", SPE (Society of Petroleum Engineers) 68065,
Proceedings of the 2001 Middle East Oil Show and Conference,
Bahrain.
9. Koederitz, L. F. and Mohamad Ibrahim, M. N: 2001, "Considerations
in Creating and using a Relative Permeability Database",
Proceeding of the 48th Annual Southwestern Petroleum Short
Course Conference, Lubbock, Texas, USA, pp. 280-287.
10. L. F. Koederitz, M. N. Mohamad Ibrahim: 2002, “Developing
a Proficient Relative Permeability Resource from Historical
Data”, Proceedings of the Canadian International Petroleum
Conference 2002, Calgary, Alberta, Canada.
11. M. N. Mohamad Ibrahim, S. B. Chuah and W. D. Wan Rosli:
2004, “Characterization of Lignin Precipitated From
the Soda Black Liquor of Oil Palm Empty Fruit Bunch Fibers
by Various Mineral Acids”, ASEAN Journal on Science
and Technology for Development, Vol. 2, pp. 57-67.
12. M. N. M. Ibrahim: 2004, “Productivity of Oil
Wells in Arbitrarily Shaped Reservoirs”, Proceedings
of the International Conference On Mathematics And Its Applications
(ICMA 2004), Kuwait University Press, Kuwait, pp. 313-317.
13. M. N. Mohamad Ibrahim: 2004, “Prediction of Oil
Production of Individual Operator in a Multiple Leases Reservoir”
In Advances in Boundary Element Technology V, Editors: V.
M. A. Leitao and M. H. Aliabadi, EC Ltd., United Kingdom,
pp. 121-125.
14. M. N. Mohamad Ibrahim and S. Shuib: 2005, “Taguchi
and BEM Analyses on the Productivity Performance of an Oil
Reservoir” In Advances in Boundary Element Techniques
VI, Editors: A. P. S. Selvadurai, C. L. Tan and M. H. Aliabadi,
EC Ltd., United Kingdom, pp. 299-303.
15. S. Shuib, M. I. Z. Ridzwan, A. Y. Hassan and M. N.
M. Ibrahim, 2005, “Topology Optimisation of Hip Prosthesis
to Reduce Stress Shielding”, WIT Transactions on The
Built Environment, Vol. 80, WIT Press, Southampton, pp.
257-265.
16. M. N. Mohamad Ibrahim, M. Y. Nor Nadiah and H. Azian:
2006, “Comparison Studies between Soda Lignin and
Soda-Anthraquinone Lignin in Terms of Physico-Chemical Properties
and Structural Features”, Journal of Applied Sciences,
Vol. 6(2), pp. 292-296.
17. M. N. Mohamad Ibrahim, I. Nur Azreena, M. Y. Nor Nadiah
and I. Mohd Saaid: “Lignin Graft Copolymer as a Drilling
Mud Thinner for High Temperature Well”, Journal of
Applied Sciences 6(8): 1808-1813.
18. M. N. Mohamad Ibrahim and S. Shuib: 2005,” Study
on Oil Reservoir Productivity Performance via Combination
of Taguchi and BEM Analyses”, Electronic Journal of
Boundary Element, Vol. 3(1), pp. 1-13.
19. M. N. Mohamad Ibrahim, M. E. Izat, A. R. Wahida and
C. S. Sipaut: 2005, “Study on Moisture-cured Polyurethane
as Undercoating Layer for Metalization”, ASEAN Journal
on Science and Technology for Development, Vol. 22(3), pp
271-283.
20. M. N. Mohamad Ibrahim, J. Laeng @J. Abdullah and K.
W. Kong: 2001, “The Optimum Drilling Pattern for Various
Dimensions of Rectangular Shaped Reservoir”, Journal
of Physical Science, Vol. 12, pp. 1-9.
21. M. N. Mohamad Ibrahim and L. F. Koederitz: 2003, “Steps
and Considerations in Developing Relative Permeability Correlations
from Historical Data”, Journal of Physical Science,
Vol. 14, pp. 69-77.
22. M. N. Mohamad Ibrahim, J. Abdullah, S. Shuib and A.
Md. Mizan: 2003 “Secondary Recovery Performance Evaluation
of Oil Reservoir using Boundary Element Method”, Journal
of Physical Science, Vol. 14, pp. 41-51.
23. J. Laeng@J. Abdullah, A. Y. Hassan and M. N. Mohamad
Ibrahim: 2003 “Integration of a CNC-Laser System for
Direct Metal Deposition Rapid Prototyping”, Journal
of Physical Science, Vol. 14, pp. 1-11.
24. M. N. Mohamad Ibrahim, M. N. Nazlina, A. D. Fauzana
and S. B. Chuah: 2003, “Recycling Black Liquor of
Oil Palm EFB into a Drilling Mud Thinner”, Journal
of Physical Science, Vol. 14, pp. 113-124.
25. M. N. Mohamad Ibrahim, M. E. Izat and A. U. Ruzila:
2004, “Penyaduran Nikel Tanpa Elektrik Ke Atas Plastik
ABS Menggunakan Kaedah Salutan Polimer (Electroless Nickel
Plating Onto ABS Plastic using Polymer Coating Method)”,
Journal of Physical Science, Vol. 15, pp. 51-62.
26. J. Abdullah, A. Y. Hassan, S. Shuib and M.N. Mohamad
Ibrahim: 2004, “Production Of Physical Bio-Model from
Scanned Data using Rapid Prototyping Technology”,
Journal of Physical Science, Vol. 15, pp. 63-71.
27. Solehuddin Shuib, M. I. Z. Ridzwan, A. Halim Kadarman
and M.N. Mohamad Ibrahim: 2004, “The Analysis of a
Compliant One-Piece Nail Caliper using Pseudo-Rigid-Body
Method in Comparison to Finite Element Method”, Journal
of Physical Science, Vol. 15, pp. 73-82.
28. M. N. Mohamad Ibrahim, A. D. Fauzana and M. N. Nazlina,
2006, “Fe-Tannin-Lignin Complex as a Deflocculant
Agent for a Water-Based Mud”, Journal of Physical
Science, Vol. 17(1), pp: 53-62.
29. M. N. Mohamad Ibrahim, M. E. Izat and C. S. Sipaut,
2006, “FTIR Characterization of Moisture Cured Polyurethane”,
Journal of Physical Science, Vol. 17(1), pp: 77-89.
30. M. N. Mohamad Ibrahim and S. Shuib, 2006, “Improving
Secondary Recovery of an Oil Reservoir Using Hot Water”,
In Advances in Boundary Element Techniques VII, Editors:
B. Gatmiri, A. Sellier and M. H. Aliabadi, EC Ltd., United
Kingdom, pp. 97-101.
31. C. S. Sipaut, M. N. Mohamad Ibrahim, M. E. Izat, 2007,
“Electroless Plating of Moisture-Curable Polyurethane
Undercoating Films”, Journal of Applied Polymer Science,
Vol. 103, pp. 1554-1565.
32. M. N. Mohamad Ibrahim, M. N. Noorhaida, M. Y. Nor Nadiah,
M. G. Azilawati and S. Shuib, 2006, “Lignin Graft
Copolymer as Mud Thinner for Deep Well Drilling Operation”,
Journal of Applied Sciences, 6(12): 2593-2598.
33. M. Ikhwan Zaini Ridzwan, Solehuddin Shuib, Ahmad Yusuf
Hassan, A. A. Shokri and M. N. M. Ibrahim, 2006, “Optimization
in Implant Topology to Reduce Stress Shielding Problem”,
Journal of Applied Sciences, 6(13): 2768-2773.
34. M. Nizam Ahmad, Solehuddin Shuib, A. Y. Hassan, A.
A. Shokri, M. I. Z. Ridzwan and M. N. Mohamad Ibrahim, 2007,
“Application of Multi Criteria Optimization Method
in Implant Design to Reduce Stress Shielding”, Journal
of Applied Sciences, 7(3): 349-355.
35. Solehuddin Shuib, Rosdi Yusoff, A. Y. Hassan, M. I.
Z. Ridzwan and M. N. Mohamad Ibrahim, 2007, “A Disposable
Compliant-Forceps for HIV Patients”, Journal of Medical
Sciences, 7(4): 591-596.
36. M. I. Z. Ridzwan, Solehuddin Shuib, A. Y. Hassan, A.
A. Shokri and M. N. Mohamad Ibrahim, 2007, “Problem
of Stress Shielding and Improvement to the Hip Implant Designs:
A Review”, Journal of Medical Sciences, 7(3): 460-467
37. M. N. Mohamad Ibrahim and S. Shuib, 2007, “An
Optimum Drilling Pattern for Oil Reservoir”, In Advances
in Boundary Element Techniques VIII, Editors: V. Minutolo
and M. H. Aliabadi, EC Ltd., United Kingdom, pp. 173-178.
38. M. N. Mohamad Ibrahim, A. Md. Ghani, N. Nen, S. Shuib
and, 2007, “Formulation of An Environmentally Friendly
Adhesive for Wood”, Proceeding of the 8th International
Seminar on Polymer Science and Technology, Tehran, Iran,
2007
39. C. S. Sipaut, G. L. A. Sims and M.N. Mohamad Ibrahim,
2008, “Crosslinking of Polyolefin Foam. III. Increasing
Low-Density Polyethylene Foam Production Efficiency by Incorporation
of Polyfunctional Monomers”, Cellular Polymers, 27(2):
67-90.
40. Mohamad Nasir Mohamad Ibrahim, Mohamad Yusof Nor Nadiah,
Mohd Salleh Norliyana, Coswald Stephen Sipaut, Sollehuddin
Shuib, 2008, “Separation of Vanillin from Oil Palm
Empty Fruit Bunch Lignin”, Clean, 36(3), 287-291.
41. Mohamad Nasir Mohamad Ibrahim, Wan Saime Wan Ngah,
Mohd Salleh Norliyana, Wan Rosli Wan Daud: “Copper(II)
Biosorption on Soda Lignin From Oil Palm Empty Fruit Bunches
(EFB)”, CLEAN, 37 (1), 2009, pp: 80-85.
42. M. N. Mohamad Ibrahim, C. S. Sipaut and M. N. Mohamad
Yusof, 2009, “Purification of Vanillin by a Molecular
IMprinting Polymer Technique”, Separation and Purification
Technology, 66, 450-456
|
